I have installed f@h again after a windows reinstall... and then I noticed my team is 0... any idea how to change this? Can this be done via the registry?
just run the config again, or manually edit your config file?
I will try that. Thanks m8.
I used -config to work it out.
Now I need to figure out how to add the -forceSSE parameter. I went to the registry to add the parameter to the service, and when the service shows up in services.msc it has added the -forcesse parameter, but I dont get a warning, and my Benchmark rating only went up so little, that it must have been regular variation... any ideas? Should I still get the warning? Do I need to add the parameter in a special order? My current parameter line is like this:
"FAH502-Console.exe -svcstart -forceasm -advmethods -verbosity 9 -forcesse"
This is a dump from the log:
[16:23:36] - Ask before connecting: No
[16:23:36] - User name: delanvital (Team 33597)
[16:23:36] - User ID: 49FC722D75352DFE
[16:23:36] - Machine ID: 1
[16:23:36]
[16:23:36] Loaded queue successfully.
[16:23:36] + Benchmarking ...
[16:23:39] The benchmark result is 6900
[16:23:39]
[16:23:39] + Processing work unit
[16:23:39] Core required: FahCore_82.exe
[16:23:39] Core found.
[16:23:39] - Autosending finished units...
[16:23:39] Trying to send all finished work units
[16:23:39] + No unsent completed units remaining.
[16:23:39] - Autosend completed
[16:23:39] Working on Unit 03 [October 5 16:23:39]
[16:23:39] + Working ...
[16:23:39] - Calling 'FahCore_82.exe -dir work/ -suffix 03 -checkpoint 15 -service -forceasm -verbose -lifeline 3220 -version 502'
[16:23:39]
[16:23:39] *------------------------------*
[16:23:39] Folding@Home PMD Core
[16:23:39] Version 1.03 (September 7, 2005)
[16:23:39]
[16:23:39] Preparing to commence simulation
[16:23:39] - Assembly optimizations manually forced on.
[16:23:39] - Not checking prior termination.
[16:23:39] - Expanded 87766 -> 563399 (decompressed 641.9 percent)
[16:23:39]
[16:23:39] Project: 1850 (Run 4, Clone 99, Gen 4)
[16:23:39]
[16:23:39] Assembly optimizations on if available.
[16:23:39] Entering M.D.
[16:28:58] Protein: p1850_Myosin6_PT_US
[16:28:58]
[16:28:58] Completed 428425 out of 500000 steps (85)
--
Is it enabled or not?
It's working...Only thing wrong is the username, that should be: DuVeL :whistle:
QuoteOriginally posted by DuVeL@Oct 5 2005, 07:05 PM
It's working...Only thing wrong is the username, that should be: DuVeL :whistle:
[post=97798]Quoted post[/post]
Nah, why would I mention a piece of wood used to hold book cases together? :devil:
The question was whether it has SSE enabled...
QuoteOriginally posted by delanvital@Oct 6 2005, 01:16 PM
Nah, why would I mention a piece of wood used to hold book cases together? :devil:
The question was whether it has SSE enabled...
[post=97891]Quoted post[/post]
That's a deuvel :devil: :ph34r: :dummy:
Open the config file and you can check everything...
QuoteOriginally posted by DuVeL@Oct 6 2005, 02:20 PM
That's a deuvel :devil: :ph34r: :dummy:
Open the config file and you can check everything...
[post=97904]Quoted post[/post]
Oh is it really? I had NO idea... :devil:
AFAIK that is not present in the .cfg file... Normally it would say something "SSE bla blah enabled.." in the FAHlog.txt
Well, adding the f@h service parameters through the registry worked. Figured someone else might wanted to know :)