Dead Men Walking

Old Server Admin Section => Archived Topics => CS Admins => Topic started by: KKND on August 13, 2007, 02:41:24 PM

Title: hlsw-2
Post by: KKND on August 13, 2007, 02:41:24 PM
(http://img249.imageshack.us/img249/7863/naamloosmg3.th.jpg)       (http://img249.imageshack.us/my.php?image=naamloosmg3.jpg)

Can someone help me too put the ports open that in need for hlsw,maybe he can fill in the pic that i did made.?
Title: hlsw-2
Post by: Anonymous on August 13, 2007, 02:48:25 PM
I didnt have to open any ports for HLSW - it just works through my router using SPI (Stateful packet inspection)

If you are trying to get them to connect just now then it won't as I think they are in the back of TLs car!
Title: hlsw-2
Post by: KKND on August 13, 2007, 02:52:18 PM
Quote from: BlueBall;201278I didnt have to open any ports for HLSW - it just works through my router using SPI (Stateful packet inspection)

If you are trying to get them to connect just now then it won't as I think they are in the back of TLs car!

I know BB they are off line now but was busy with the hole morning.....this is what i get from hlsw when i try to test udp port 7130

HLSW Port Scan for 213.84.242.254

UDP Port 7130: CLOSED

i know i must use this port only thing is i dont know how too put it into my router...:crying:
Title: hlsw-2
Post by: Anonymous on August 13, 2007, 02:54:57 PM
Quote from: KKND;201279I know BB they are off line now but was busy with the hole morning.....this is what i get from hlsw when i try to test udp port 7130

HLSW Port Scan for 213.84.242.254

UDP Port 7130: CLOSED

i know i must use this port only thing is i dont know how too put it into my router...:crying:



i get the same thing but HLSW works fine :)
Title: hlsw-2
Post by: KKND on August 13, 2007, 03:03:10 PM
Quote from: BlueBall;201281i get the same thing but HLSW works fine :)


Gonna look if it works after i throw against the wall :ranting2::ranting2:
Title: hlsw-2
Post by: Anonymous on August 13, 2007, 03:05:33 PM
Do you have to open any ports for other applications? Steam etc? If not then HLSW should probably just work "out of the box"
Title: hlsw-2
Post by: KKND on August 13, 2007, 03:09:05 PM
Quote from: BlueBall;201285Do you have to open any ports for other applications? Steam etc? If not then HLSW should probably just work "out of the box"

Nope i dont have too BB..
Weird thing is when i switched provider i have this prob before i had never this prob and hlsw works just fine with the logs...

I think i rust my case....
Title: hlsw-2
Post by: TeaLeaf on August 14, 2007, 08:42:50 AM
I have port forwarding to make certain aspects of the logging work.  I set my router to forward HLSW ports to my PC to make sure that bit works properly.  Not sure if this needed in current versions, but it certainly used to be the case.  NAT> port forwarding is usually where you find the option to do this.  

TL.
Title: hlsw-2
Post by: KKND on August 14, 2007, 10:54:12 AM
Quote from: TeaLeaf;201456I have port forwarding to make certain aspects of the logging work.  I set my router to forward HLSW ports to my PC to make sure that bit works properly.  Not sure if this needed in current versions, but it certainly used to be the case.  NAT> port forwarding is usually where you find the option to do this.  

TL.

Do you know TL how i have too fill in above pic..?
Title: hlsw-2
Post by: TeaLeaf on August 14, 2007, 01:37:34 PM
Well on my Draytek I simply went to the web GUI, slected the NAT config section, selected Port Forwarding/Redirection from the menu and then just filled in a few simple IP and port numbers int he config page.

TL.
Title: hlsw-2
Post by: KKND on August 16, 2007, 02:19:34 PM
L 08/16/2007 - 14:11:54: rcon from "213.84.242.254:50315": command "logaddress_add "213.84.242.254:64376""
L 08/16/2007 - 14:12:00: " Xavier<653>" killed " Joe<655>" with "ak47"
L 08/16/2007 - 14:12:00: Team "TERRORIST" triggered "Terrorists_Win" (CT "0") (T "11")
L 08/16/2007 - 14:12:00: Team "CT" scored "0" with "4" players
L 08/16/2007 - 14:12:00: Team "TERRORIST" scored "11" with "4" players
L 08/16/2007 - 14:12:00: World triggered "Round_End"
L 08/16/2007 - 14:12:06: "FotR|[ZoLtAn*Uk*]<656>" triggered "Got_The_Bomb"
L 08/16/2007 - 14:12:12: World triggered "Round_Start"
L 08/16/2007 - 14:12:30: "FotR|[ZoLtAn*Uk*]<656>" killed " Wade<652>" with "ak47"
HLSW NOTITIE: Connection lost

As you can see here the log works for just a few sec's,but then it lost connection.....?
Title: hlsw-2
Post by: Anonymous on August 16, 2007, 02:21:04 PM
Quote from: KKND;201763L 08/16/2007 - 14:11:54: rcon from "213.84.242.254:50315": command "logaddress_add "213.84.242.254:64376""
L 08/16/2007 - 14:12:00: " Xavier<653>" killed " Joe<655>" with "ak47"
L 08/16/2007 - 14:12:00: Team "TERRORIST" triggered "Terrorists_Win" (CT "0") (T "11")
L 08/16/2007 - 14:12:00: Team "CT" scored "0" with "4" players
L 08/16/2007 - 14:12:00: Team "TERRORIST" scored "11" with "4" players
L 08/16/2007 - 14:12:00: World triggered "Round_End"
L 08/16/2007 - 14:12:06: "FotR|[ZoLtAn*Uk*]<656>" triggered "Got_The_Bomb"
L 08/16/2007 - 14:12:12: World triggered "Round_Start"
L 08/16/2007 - 14:12:30: "FotR|[ZoLtAn*Uk*]<656>" killed " Wade<652>" with "ak47"
HLSW NOTITIE: Connection lost

As you can see here the log works for just a few sec's,but then it lost connection.....?

thats an HLSW prob. I get it a lot as well but if you are patient you will see it continues to give log info! Well it does for me anyway after I get that message.