My F@H is sitting in me taskbar for the past 4 hours "attempting to send results"? Can anyone throw the light switch on this?
has your filewall updated it's core program recently, it may have forgot you settings, just an idea
Quote from: sulky_uk;265857has your filewall updated it's core program recently, it may have forgot you settings, just an idea
mmm no, no blocked items in the firewall
I've had that a few days ago Browne, eventually it started on a new work unit but it cached my previous results. The moment the next work unit was done it sent in the results of that wu and the one that wasn't able to send before and presto, got points for both.
Quote from: Gaara;265865I've had that a few days ago Browne, eventually it started on a new work unit but it cached my previous results. The moment the next work unit was done it sent in the results of that wu and the one that wasn't able to send before and presto, got points for both.
Hopefully, the WU wont get lost with me dicking about on the HD. I see its working on another as we speak, has been for some hours...
I had the same thing, what I did to resolve it; Pause the folding, then start it up again, worked for me and it sended in right away and started folding again.
I had a similar problem a few months ago - I think it is a common problem to do with connecting to the work server. Anyway, it sorted itself out in the end but it took a few days if I remember correctly.
See this (http://www.deadmen.co.uk/forum/showthread.php?t=24928) sticky
2 days later, my lonely wu's are still looking for their Mammy. Excerpt from logfile:
26/02/09
[20:56:03] + Attempting to send results
[20:56:08] - Server reports packet it received specified a data size of 0.
[20:56:08] (May be due to corruption during network transmission or a corrupted file.)
[20:56:08] Could not transmit unit 05 to Collection server; keeping in queue.
27/02/09
[10:20:41] - Couldn't send HTTP request to server
[10:20:41] + Could not connect to Work Server (results)
[10:20:41] (128.59.74.4:8080)
[10:20:41] - Error: Could not transmit unit 05 (completed February 25) to work server.
[16:24:12] + Attempting to send results
[16:24:17] - Server reports packet it received specified a data size of 0.
[16:24:17] (May be due to corruption during network transmission or a corrupted file.)
[16:24:17] Could not transmit unit 05 to Collection server; keeping in queue.
28/02/09
[00:06:43] - Couldn't send HTTP request to server
[00:06:43] + Could not connect to Work Server (results)
[00:06:43] (128.59.74.4:8080)
[00:06:43] - Error: Could not transmit unit 05 (completed February 25) to work server.
[00:06:43] + Attempting to send results
[00:09:53] - Couldn't send HTTP request to server
[00:09:53] + Could not connect to Work Server (results)
[00:09:53] (171.65.103.100:8080)
[00:09:53] Could not transmit unit 05 to Collection server; keeping in queue.
[15:25:32] + Attempting to send results
[15:25:36] Timer requesting checkpoint
[15:25:54] - Couldn't send HTTP request to server
[15:25:54] + Could not connect to Work Server (results)
[15:25:54] (128.59.74.4:8080)
[15:25:54] - Error: Could not transmit unit 05 (completed February 25) to work server.
[15:25:54] + Attempting to send results
[15:29:03] - Couldn't send HTTP request to server
[15:29:03] + Could not connect to Work Server (results)
[15:29:03] (171.65.103.100:8080)
[15:29:03] Could not transmit unit 05 to Collection server; keeping in queue.
Just checked the status of server "fail" & "reject"
If you follow the instructions in the sticky thread I refer to, you will be able to find out if there is a server issue or whether the problem is caused by something local.
Quote from: delanvital;266224If you follow the instructions in the sticky thread I refer to, you will be able to find out if there is a server issue or whether the problem is caused by something local.
As I said, Fail & reject showing in server logs...??
My f@h logs showing same as above posts. This is address of target server:
http://fah-web.stanford.edu/logs/128.59.74.4.log.html (http://fah-web.stanford.edu/logs/128.59.74.4.log.html)
Quote from: Browne;266278As I said, Fail & reject showing in server logs...??
My f@h logs showing same as above posts. This is address of target server:
http://fah-web.stanford.edu/logs/128.59.74.4.log.html (http://fah-web.stanford.edu/logs/128.59.74.4.log.html)
I'm not an expert but it seems to be a similar problem to the one I had a few months ago - the F@H server dealing with your WU is having problems. Not much you can do until the folding crew sort it out (my 2 cents).
The server is listed as having failed and input to it is being rejected at the moment. Just let the WU sit there and it will eventually be handed in.
Quote from: delanvital;266318The server is listed as having failed and input to it is being rejected at the moment. Just let the WU sit there and it will eventually be handed in.
But teacher will be mad at me for being late