I have an Adaptec 1430SA raid controller running Raid10 in my main PC and I am looking to upgrade from my current 32-bit XP Pro SP3 to 64-bit Windows 7, but I have found that there does not seem to be much support for Adaptec SATA raid controllers under Windows 7 which surprised me.
Has anyone else come across this problem or am I just unlucky with the card I have? Also, if I have to change cards what should I be looking at for the future? My own thoughts were to continue running at least Raid 0 for the time being and it would be nice to have the additional ports for future upgrades (like when the existing 4-drive raid10 gets swapped out for SSDs instead of SATA drives).
i had a Adaptec 2405 controller, which i had trouble finding a windows 7 x64 driver for in the beginning, i was using some dinky one i found on some random board, but it did the job
Thanks Kreg, might have to buy a diff raid controller card that is already supported and then stuff in some SSDs in a raid 0..... :g:
Areca makes som absolutely fantastic controllers