How to setup and restore the server for the one hour race:
Join at least 15 mins before qualifying using the admin password (http://www.deadmen.co.uk/forum/showthread.php?22019-Server-Passwords) and type:
/pass=mymates
/qual=20
which sets the guest password and quali to 20 mins. If there isn't enough time to start a normal race that will end with at least 2 mins to spare before qualifying starts, either reduce the laps by typing:
/laps=x
x being the number of laps, or extend qualifying by using the /qual= command so that qualifying ends at exactly 20 past the hour.
Before starting qualifying or during the last race before qualifying, type (is case sensitive):
!cfg SecondsCountdown=580
You should see a message in chat that says configuration item accepted, this starts a 580 seconds countdown 20 seconds after qualification ends.
When the last race before qualification ends, the countdown will start as usual, type:
!cv
This command cancels the countdown.
To start qualifying, type:
/qualify
and press return 3 seconds before your chosen qualifying start time.
After qualifying starts type:
/hours 1
Join the track and press F12 to check the race length is correct, if all is ok, then you can sit back and everything should happen automatically until the 1 hour race ends.
:racing:
After all racers have finished, type:
!cv
to cancel the countdown, remind everyone to save replays and check the weeks points total (!ptc) then end the race in 30 seconds to allow for saving replays by typing:
!end 30
pick the new combo using the /cars= and /track= commands (http://www.deadmen.co.uk/forum/showthread.php?14777-Live-For-Speed-Admin-commands), when it's loaded and you're on track, type:
/pass=
to clear the guest password, then type:
!rld
to reload the standard Airio settings, you will see a conformation message in chat if it worked. Work out how many laps to fill 10-12 mins using !top to see the world record lap time, and set by using the /laps= command.
Finally, type:
!clrc
to clear the previous weeks championship points (!ptc)
:thumb:
!re starts the countdown
!re 30 starts a 30 second countdown.
!pl shows a list of connected players.
!rn shows a list of recently disconnected players.
[h=4]!grp [
num][/h] This is a command for
grouping races into series (5 races are 1 serie, by default). If used without parameter, it clears the current serie data, starting a new round. When a number is specified, current serie is cleared and new one with the set number of races started.
- !grp â€" clears current serie, starts a new one without changing the number of races.
- !grp 2 â€" clears current serie, starts a new one for two races.
To run the GT2 class (restricted FXR, XRR + FZR) type:
!cars gt2
To display a message for setting the restriction % type (case sensitive):
!cfg BadCarType=USE RESTRICTION: FXR=23% XRR=24% FZR=20%
The command for showing all classes and their restriction amounts is:
!cars
The open config list can be found here: http://www.lfsforum.net/showthread.php?t=73903
A list of the car groups and their restrictions: https://www.lfsforum.net/showthread.php?t=76057