Print Page - Ports Used by F@H

Title: Ports Used by F@H
Post by: smite on September 16, 2003, 09:18:02 PM

I went to look at log as you just said and it was 3DNOW and i was sure i had added that line........like a dickhead i hadnt restarted it had i......now it reads SSE :D

Title: Ports Used by F@H
Post by: Doorman on September 29, 2003, 12:37:12 PM

Anyone noticed that their little 'tooltips' tags on the taskbar get out of synch or don't display properly? The blame lies at the door of F@h! Exit the programme and restart. That'll cure it. Not a big deal but an irritation.

Title: Ports Used by F@H
Post by: JB on October 03, 2003, 04:51:09 PM

Now i have my spangly router setup and running, is there any ports i need to forward to allow it to send back its info?

Title: Ports Used by F@H
Post by: TeaLeaf on October 03, 2003, 05:40:26 PM

At the moment they only use 8080, but they have historically also used 80. A full port list is available here (http://folding.stanford.edu/serverstat.html).

The whole stanford.edu domain is 171.64.0.0 - 171.67.255.255.

TL.

Title: Ports Used by F@H
Post by: Anonymous on October 03, 2003, 07:02:26 PM

QuoteOriginally posted by JB@Oct 3 2003, 04:51 PM
Now i have my spangly router setup and running, is there any ports i need to forward to allow it to send back its info?

For most "home" routers you shouldn't need to as they will allow outbound traffic. However, do as TL says if your one doesn't work like that.

Dead Men Walking

Forum Archive 2023 => dMw's Community Centre => Community Archive => Dead Men Folding => Topic started by: smite on September 16, 2003, 09:18:02 PM