I'll quote the disclaimer from the article here first as this involves messing with your psu!
QuoteEditor's Note: Deadmen Walking strives to provide our readers with bleeding edge information regardless of technical difficulty or potential hazard. To do this, it must come with a level of responsibility. If done improperly, this mod could: cause injury, damage your PSU, damage your PC, fry your home electrics, bring down the south-western power grid, cause bean sprouts in India to wilt, and/or cause interference in the television in Bill Gate's bedroom. We are assuming that before you perform this mod you: have the proper tools and parts required, take all safety precautions needed, know what you're doing, know how to and are skilled at soldering, at the very least have a friend who can perform this mod for you (PiLsY, my PSU is in the post...), are a skilled electrician with 10+ years of references, and/or have no intention of messing with Bill Gate's television.
Psu Mod (http://www.bleedinedge.com/guides/psu_3.3v_mod/psu_3.3v_mod_pg1.html)
Sounded good until he mentioned wire cutters, then I got scared and switched over to Eastenders. :D
it must come with a level of responsibility
If done improperly, this mod could: cause injury,
damage your PSU, damage your PC,
fry your home electrics,
bring down the south-western power grid,
cause bean sprouts in India to wilt,
and/or cause interference in the television in Bill Gate's bedroom
Yeah right ill think ill keep it as it is, i prefer having a pc if i attempted it im sure something would go wrong :unsure: . I had a quick read about the article and has very good explained steps for those who wish to attempt it. But for now ill stick with what ive got and i also got another gig of ram today :D