Dead Men Walking

http://ukcsl.taa-gaming.com/ (http://ukcsl.taa-gaming.com/)

Pay particular attention to the rules *and* the new anti-cheat tool being used.

There is a test server provided to make sure you are configured correctly.

I trie the test server. I gete:

Disconnected from server. Bad file!

any ideas? The map was dust2 and I play that OK on dMw servers

You DL'd and installed the ssClient OK?

http://ukcsl.taa-gaming.com/downloads.php (http://ukcsl.taa-gaming.com/downloads.php)

Well, not much of installing is there. You just start the exe file and select the server. Worked for me instantly btw.

I did the same as Sadako but got the error message when I tried to join the server

QuoteOriginally posted by BlueBall@Feb 13 2005, 12:05 PM
I did the same as Sadako but got the error message when I tried to join the server

[post=77144]Quoted post[/post]

[/b]

Tried to DL it again? It could just be a corrupt download.

QuoteOriginally posted by Dr Sadako@Feb 13 2005, 10:08 AM
Tried to DL it again? It could just be a corrupt download.

[post=77147]Quoted post[/post]

[/b]

The file launches fine, I can double click the server to connect the ssClient to it but when I try to join the server to play CZ I get the error message from within CZ.

QuoteOriginally posted by BlueBall@Feb 13 2005, 12:11 PM
The file launches fine, I can double click the server to connect the ssClient to it but when I try to join the server to play CZ I get the error message from within CZ.

[post=77150]Quoted post[/post]

[/b]

ah ... thought you got the message from ssClient. Going to try and connect as well. Brb for feedback.

http://www.ssclient.ufonurkka.mine.nu/clientmanual.php (http://www.ssclient.ufonurkka.mine.nu/clientmanual.php)

From this I think we need to edit/add the path in some way. I get the same error message as you BB.

I'm starting to wonder if it is really worth it.  <_<

What a pile of poo!

Oh and thanks for checking Mats.

out of interest (and my sanity), whats the path?

QuoteOriginally posted by Jamoe@Feb 13 2005, 12:30 PM
out of interest (and my sanity), whats the path?

[post=77156]Quoted post[/post]

[/b]

Aye that is the question. Keep looking.  <_<

I had to edit the server list start command in ssClient to put the following as the startup line (you DO need the quotes):

"C:\Program Files\Steam\SteamApps\email address\counter-strike\hl.exe" -game cstrike

However, it launches CS and doesn't connect properly as the program is too stupid to pass through the server details of the server you just double clicked and doesn't prompt for a password so I you will need a +connect and +password entry too.

Let me guess, we are going to have to edit the entry for every single server we play on UKCSL, if this is the case then count me out, I have better things to do with my life mad.gif

This suks, can't we just have CD or VAC, FFS we play for fun.

Oh I tried it with CZ settings too incase but get the same bad file error message. If anyone gets this working please post . I've just wasted 30 minutes of my life on something that doesn't work properly. If they want us to use this then they need to fix it otherwise I'm not wasting my life over it  :angry:

UKCSL servers are CS only so you do not need to bother with CZ.

The plot thickens

QuoteConnecting to 213.230.205.253:27030...
Connection accepted by 213.230.205.253:27030

BUILD 2738 SERVER (0 CRC)
Server # 213

***************************************************
You are joining a server that implements Valve's anti-cheat system (VAC).
Please note that the use of Cheats is a violation of your End User License
Agreement for the software and/or your Steam Subscriber Agreement.

If Valve or the game host detects your use of Cheats on an VAC-enabled
server, your Steam Subscription and/or your product key for the software
will be banned from playing on VAC-enabled servers for one (1) year.
***************************************************
models/player/urban/urban.mdl
SC: The Server does not allow custom models! Please reinstall!
Bad file

N.B. I dont even have that directory ... in any of my installed steam games.

I suspect it's caused by the fact that CZ owners automatically got newer CS1.6 models which the server is seeing as 'custom'.

I'm installing original models to check this.

Looks like it's the case ...

QuoteDescription
============
These are the original CS 1.6 models. If you are using CZ models or
other custom models, then you will need to install these models in
order to play on UKCSL Soundcheck enabled servers.


Installation
=============
In the .zip archive there are a bunch of model folders. Place these
in the following folder:

 ..\Steam\SteamApps\your@email.com\counter-strike\cstrike\models\player

Create the folder if it does not exist. If there are already model
folders there, then it is recommended that you back them up prior to
installing these models.

Link to models?

QuoteOriginally posted by OldBloke@Feb 13 2005, 01:52 PM
These are the original CS 1.6 models. If you are using CZ models or
other custom models, then you will need to install these models in
order to play on UKCSL Soundcheck enabled servers.

Well, I am not using or have used any custom models. I have a clean install.  <_<

QuoteOriginally posted by Dr Sadako@Feb 13 2005, 01:53 PM
Link to models?

[post=77168]Quoted post[/post]

[/b]

http://ukcsl.taa-gaming.com/downloads.php (http://ukcsl.taa-gaming.com/downloads.php)

QuoteOriginally posted by Dr Sadako@Feb 13 2005, 11:56 AM
Well, I am not using or have used any custom models. I have a clean install. <_<

[post=77169]Quoted post[/post]

[/b]

Your models were updated by CZ.

I installed the original model and connected OK first time. The ssClient console showed that 2 screenshots were taken and uploaded to the UKCSL server OK. I didn't notice any lag.

So to recap ...

Download the ssClient. (http://ukcsl.taa-gaming.com/downloads/anticheats/ssClient_2.41_UKCSL_Package.zip)

If you have CZ installed then Download CS1.6 models (http://ukcsl.taa-gaming.com/downloads/models/cs_1.6_models.zip)

Run the client and double click the UKCSL entry (no configuration changes are necessary).

Connect to the server (any UKCSL server).

i'll leave it :blink:

QuoteOriginally posted by Vincentvega@Feb 13 2005, 12:11 PM
i'll leave it :blink:

[post=77173]Quoted post[/post]

[/b]

You were asking for more matches yesterday    :angry:

OK, that seems to have fixed it but jeezus how many people has it taken to sort that out? They need to post better instructions rather than run the client and connect  <_<

Oh, and the ssClient forums don't work under Firefox :(  Well they do if you are happy with a 50 pixel high view of the forum :(

QuoteOriginally posted by BlueBall@Feb 13 2005, 12:38 PM
OK, that seems to have fixed it but jeezus how many people has it taken to sort that out? They need to post better instructions rather than run the client and connect <_<

[post=77184]Quoted post[/post]

[/b]

BTW, you don't need to put path to your HL.exe into the ssClient if you have downloaded the CS models. Just connect through server browser as normal once ssClient is running. <- maybe stating the obvious but I thought I would clarify

but can it be explained in laymans terms plz then i'll put it in :blink:

download client,
download cs1.6 models,
install models,
run client,
double click the 1 server in the client list to connect to their auth server,
open your steam server browser,
add the test server mentioned on the UKCSL website,
connect to it from Steam server browser

voila :)

QuoteOriginally posted by BlueBall@Feb 13 2005, 09:23 PM
download client,
download cs1.6 models,
install models,
run client,
double click the 1 server in the client list to connect to their auth server,
open your steam server browser,
add the test server mentioned on the UKCSL website,
connect to it from Steam server browser

voila :)

[post=77219]Quoted post[/post]

[/b]

I thank u

bb do i put these models in cz or cs?

QuoteOriginally posted by Vincentvega@Feb 14 2005, 08:58 PM
bb do i put these models in cz or cs?

[post=77296]Quoted post[/post]

[/b]

CS

i get bad file up when connecting

Looks like you may not have put models in right place.

See here (http://forum.deadmen.co.uk/index.php?showtopic=8848&view=findpost&p=79126) for instructions.

right place ...maybe i'll delete some of the "aint sure wot they are" ones and try again :blink:

I also get bad file when connecting ...the files are in the right place ....should get another chance to look into tomorrow ...

 :(

no still no joy :angry:

Yeah, may be worth atry. It might not like any custom models you have so you'll prob have to clear out all the "non-standard" models :(

like guns and stuff?
if so i wont bother.
cheers BB for the help..oh and u madness :(

Connected.  And remained connected.  Noticed some slight lag spikes though and at one point was running 30-40 choek for a while.  Anything to do with the uploading of screenshots?

TL.

Can this thread be cleared a bit? Lots of English text for me.
Installing and downloading as we type.

Maybe the wrong thread for this.....but are we playing a CS league again ???????????????????

QuoteOriginally posted by Niel@Feb 15 2005, 07:05 PM
Maybe the wrong thread for this.....but are we playing a CS league again ???????????????????

[post=77370]Quoted post[/post]

[/b]

We've been in all four previous UKCSL events and, as they're well run and very competitive, it would not make sense to duck out of season five.

Successfully connected.  :)

The server was really lag for me, 3 big lagspikes and even got me disconnected once from the server when I had a score of 9 as CT.... :(

Bumped for DA!!  ;)

4 the UKCSLmatches (which are played in normal CS):

QuoteOriginally posted by OldBloke+Feb 13 2005, 12:04 PM-->

QUOTE(OldBloke @ Feb 13 2005, 12:04 PM)

Your models were updated by CZ.

If you have CZ installed then Download CS1.6 models (http://ukcsl.taa-gaming.com/downloads/models/cs_1.6_models.zip)

Run the client and double click the UKCSL entry (no configuration changes are necessary).

Connect to the server (any UKCSL server).

[post=77171]Quoted post[/post]

[/b]