prometeia system!

[TeaLeaf]

The super cool temps of -32c cause less condensation than say 0c in a room of ambient 25c. The dew point is usually just below ambient bepending on the humidity. However there is plenty of time for condensation to form while its all reaching the -32c temp. The promethia peeps rely on the fact their kit will get there quickly.

They reckon that it gets down to about -40 C in 3 minutes from an ambient temperature start.

That's quick enough for me  

Anyway, if SS says I'm going to die then I may as well buy it before I do, right?  :?

TL.  

[albert]

tealeaf, if u ave that Prometeia remember to get some dyelectric grease and closed cell foam. that beast is not just water cooling its chilling below ambient and its damn irrisponsible of them not to heavily recomend more condensation measures.

use the grease and foam to cover the cpu area on the back of the motherboad and also smeal about 1/2 ro 1 inch around the cpu socket on the front of the board.

u c its quite poss the waterblock will cool the cpu the socket and the surrounding motherboard below ambient.

Oh dear oh dear, there's only one thing that beast is good for, quick chill of my newly purchased beers.  :lol:  Can I suggest you guys acquire a life    any life preferably one without a fridge/mod case.  

[TeaLeaf]

Oh dear oh dear, there's only one thing that beast is good for, quick chill of my newly purchased beers. :lol: Can I suggest you guys acquire a life any life preferably one without a fridge/mod case.

....you mean they do a Lian Li Beer Chiller Mod?  paaaarty! :rainbowafro:

TL.  

[sheepy]

hey TL look what i just found...

http://www.oc-athlonxp.com/vapo-li.htm

fitting a vapo chill cooling system [like the promethia] inside you case!

[TeaLeaf]

Nice, but I am not sure I could trust myself that much with a Dremel  :lol:

TL.  

[sheepy]

i wish i had a dremel, i have to use a jigsaw and i cant do some of the designs that i want

[Stryker]

Guys, just bought a Dremel copy from B&Q.  Its called a "handy tool" or somthing gay like that.

Its just like a dremel with a very nice rubber type coating for easy grip.  It is variable speed and comes with 60 bits including drills, sanders, smoothers, engravers, saws etc etc to get you started.

"How much?" I hear you say.... £14  thats right, £14

[sheepy]

dammit why isnt there a B&Q around here!!! i think there might b one in camb tho. i have to get me one of those, was it a sale offer or anythink like that