modding update

[sheepy]

my fan bus arrived today as did my rubber moulding for around the window

this is the fanbus-
http://www.kustompcs.co.uk/product.php?vie...ad2e6e770c26400

only down side is that presently i can only have one fan running from it! this is due to the connectors provided comming 1cm to short to reach my exaust fans and i need to do some cutting to put the lights etc on it.

this is the rubber moulding

http://www.coolcasemods.com/products.php?menu=5&id=27#

i chose fine rubber mould ment for the edges of fan blow holes as i like the clean look it gives and i dont like thick "c cut" rubber moulding.

for all u that dont no or cant rember i have a chieftech dragon case in green. 1/2 way down that page.

http://www.overclockers.co.uk/acatalog/Onl..._Cases_128.html


next will be to fit the windows and get the temp monitor then the final stage will b the water effect!!! w00t.

ill post pic of the process in motion when i get em.

[sheepy]

right im all wired up now, ill put a foto up later of the fan bus, i have running from it 2 x thermaltake exaust fans, 1 x antec flashing led fan [soon will b 2] and a purple neon light,

ill b putting the blue cathode on it soon, im doing the window cutting tomorrow i think. so should b completly modded by the weekend, then im starting go my key board, making it glow up between the keys.

after that ill get working on the orrange AA van light to go inside the case as well.

then its the water bubble thingy

[Stryker]

oh boy.

[smilodon]

I have a friend who was serioulsy into Case-Modding. He spent a small fortune modding his PC - cathodes, water cooling, neon and the like.

However one day he suddenly realised that his private parts were in fact a perfectly normal size and therefore he really didn't need to bother. Saved him a fortune.



==============================
Let the flack fly..........Incoming!!!!!!!!!!!
 :wink:  :wink:  :wink:  :wink:  :wink:  :wink:

[JB]

Hehe..   Prawned !

[sheepy]

ok then u may jest but its just like ppl modding cars, only i dont spend any where near as much on it as they do. all of the mods to this new case will have only cost me a disposal amount of nothing. all cathodes neons etc can be swaped over. the windows will b removable head in place with velcro so that they can b replaced if scratched etc.

[sheepy]

this fan bus i am now highly recomending. my really noisy fans are almost running silently now!!!!!
im running2 of them at 1/2 speed insted of one at full and its so much quieter

[Gh0st Face Killah]

Looking forward to seeing the piccies Sheepy.

Just added the final light to mine. Its a blue neon string and it runns down the side of the door and round the bottom of the drive bay at the bottom of the case.