GPU/ standard client setup and optimizations

Started by kregoron, June 28, 2008, 02:00:59 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kregoron

A few people have been poking me about how to configure the new nVIDIA GPU2 client to run together with standard and SMP clients.
Ive been playing around with it today, and it was actually pretty simple.

Install the Clients from F@H (ofc)
When setting up the std/SMP client, make sure its running with the -local flag, else the GPU2 client will crash over and over.
When setting up GPU2 client, set Core priority to slightly higher, so the client is given priority over the CPU, then it wont be penalised as bad in the PPD.

Thats what i did when i set up the standard client and the GPU2 on my media center.

Ill post more Optimizations when i find em ;)
and when i get the last few twinks sorted with the multiple GPU2 clients in sli setups ;) (yes it is apperently possible to utilize em like that ;) )


Oh an btw a new Core is out for the GPU2 client, just shut down the client and delete the FAHcore_11 file, and it will automaticly download the new core when you start the client again.. NOTE this will only work if you are running the latest Beta8 of the GPU2 client.
The new core makes the computer run a lot more smooth, less stuttering while browsing, watching movies and such.. Tho it has a minor impact on PPD, i went down about 20 (which is much) with this new core. But i suggest you backup the old core before you delete it, as some people have experienced a loss of 1000ppd from it.
http://webchat.quakenet.org/ ||| Channels: #deadmen


delanvital


kregoron

Ye its mad, ive been chatting with a chap on IRC about it, and he got it running just fine, both clients get a minor impact when running in a setup like that.. but hes got two 8800GTX cards in sli which is folding around 3500-3600 each.. so im gonna uppack my desktop pc and boot it up one of these days, to see if we cant get it running on mine.. and ill post a nice guide when i get it done.. will be awsome tho if i could do about 2x3500 and a SMP client on the Phenoms 3 free cores :D
http://webchat.quakenet.org/ ||| Channels: #deadmen


Lexander

Kregoron any new info about this one ?
And as far as I can see, only way to run SMP-client is to run it as a service, am I right?
Welcome to IRC #deadmen @quakenet

kregoron

Well i dropped building the guide for multi GPU support, as i seems F@H 6.20 seems to partially support multi clients by using a weird SMP alike process to distribute the workload, sadly one doesnt really gain much more then 40-50% with an aditional card atm..

Tho yes to use the most of your sli setup you can setup two clients with different machine id's, like the old way of using multiple std clients on multicore processes works better, just a pain to setup.. if requested ill try to explain more precisely how this is done?
http://webchat.quakenet.org/ ||| Channels: #deadmen