I've got a really big WU now.

[DuVeL]

It's 10000 in size. Wow, haven't had such 1 be4.

Now folding the Project: 729 (Run 5, Clone 5, Gen 19).

Does any of you guys get these size of WU's?

[TeaLeaf]

That's a small 100 framer I think, only worth 11.7 points!   One of machines (a 2500 Barton) is muching through an 8 pointer (project 814) at a frame every 5 minutes, but that one has 12,000 atoms to calulate rather than 200!   What rate are you folding at on 729?

Check here for the points per WU and project numbers.  The biggest gromacs that I get tend to be 2,500,000, but this is misleading as most are still only 400 frames!

TL.

[DuVeL]

Hhmmzz, you're right, it goes quit fast:

[18:32:02] Writing local files
[18:32:04] Completed 2400000 out of 10000000 steps  (24)
[18:34:44] Writing local files
[18:34:46] Completed 2500000 out of 10000000 steps  (25)
[18:37:26] Writing local files
[18:37:28] Completed 2600000 out of 10000000 steps  (26)
[18:40:09] Writing local files
[18:40:11] Completed 2700000 out of 10000000 steps  (27)
[18:42:59] Writing local files
[18:43:01] Completed 2800000 out of 10000000 steps  (28)
 
2 seconds to get to the next point. :unsure:

[sheepy]

woot my new puta has munched thru its 1st half, and sent it, this is what was left from the oldf machien
wish i could just set that as a folding machine but its not gunna happen

[Red_Thunder]

I got a Barton 2500 running @ 1.87  
I seems to take ages...

Should i try OCing it ? would that help much?
 Ive only done 1 WU on this machine
400 in size.
21/400 on my next.
Should i use console version ? and set flags or somthing ive heard about :S
Faster ?

The Band of Crunchers have started me and Blue have borged 10 ppl so far.
And they arnt the ppl i intended on
Should i tell ppl to get the console version ?


Dan
Red

[TeaLeaf]

Originally posted by Red_Thunder@Feb 11 2004, 10:15 AM
I got a Barton 2500 running @ 1.87
I seems to take ages...

Should i try OCing it ? would that help much?
 Ive only done 1 WU on this machine
400 in size.
21/400 on my next.
Should i use console version ? and set flags or somthing ive heard about :S
Faster ?

The Band of Crunchers have started me and Blue have borged 10 ppl so far.
And they arnt the ppl i intended on
Should i tell ppl to get the console version ?


Dan
Red

Yes, use Console Version 4 - it folds faster than graphical.  You need to enable SSE to get it to go quickly.  With F@H version 4.0 there are some new flags added. If you want SSE enabled under version 4.0 and later then you need to add the flag -forcesse to your target line. My shortcut looks like this:

"C:\Documents and Settings\Paul\My Documents\My Received Files\Folding\FAH4Console.exe" -local -forcesse -advmethods

Existing users of version 3.25 beta would need to remove the -forcesse and replace it with -forceasm.  -forceasm is not used under version 4 or later.  

Enabling SSE will speed up your folding by about 30%.  The start up note sin the console on a new WU should say 'SSE Enabled'.  If it says 3DNow then you have done it wrong!

Next question will be: 'can I change the client in mid-WU?'.  The answer here is YES!  Just save the console client in the same folder as your current version.  Edit the shortcut to point at the new version 4 console client, shut the old oen down, click the shortcut and version 4 will open up.  Ignore the warnigns at the beginning, they are normal!  

GL.


TL.

[sheepy]

i just got a 600 part WU but each individual bit is 20 big

[sheepy]

each 20point bit is taking about an hour so 30hours of folding at it should be done