Is it working?

[Peppster]

I have installed the program and it is working

Now to the little problem.
The program says that it is working, but I´m still on 0% after 10 min

[Dr Sadako]

Originally posted by Peppster@Feb 21 2004, 11:52 PM
I have installed the program and it is working

Now to the little problem.
The program says that it is working, but I´m still on 0% after 10 min

Sorry to say it but it progresses slowly ...come again in 10 hours.

[TeaLeaf]

Some of these WUs can take a while to munch through - I just got a 400 frame Tinker (which is slower than a Gromac already) and it took over 24 hours to get done on a fast machine.  Medium paced machines could take 48 hours to get through a 100 frame Gromac core, it just depends upon the size of the WU you got to work on.

Check the progress now - what does it say now having had the night to work on it?

TL.

[Peppster]

It is working now 20/600   very slow!  

Last night I was downloading, could that affect the process?

[Dingo]

Have a quick look at your configuration to see what percentage of the processor it is set at.....obviously the higher the quicker <_<

[TeaLeaf]

Originally posted by Dingo@Feb 22 2004, 11:35 AM
Have a quick look at your configuration to see what percentage of the processor it is set at.....obviously the higher the quicker <_<

Default is 100% for the install.  A quick look at Task Manager will show what is being used by the core.  The download will slow down F@H to the extent that the CPU needs to process what has been downloaded for storage.

What speed PC are you running it on Peppster?

TL.

[sheepy]

i got afeeling that you are running on the same sor of WU as me

i have had 3 600unit WU's in a row, they arnt that big m8. they are passing through at about 20units every hour on average and thats on a 1.4 gig processor they are worth about 24creds per WU[aprox]